Plant Phenology Indicators make Monitoring A LOT easier

IMG_3293_01 Growers and landscapers use Growing Degree Day models to help predict when various developmental stages of pests will be present, based on temperature data they have collected themselves or obtained from the local weather office. These GDD pest models can be used to fine-tune the monitoring program and anticipate pests early. These models are meant to enhance the effectiveness of a monitoring program, not replace it.  But unless you’re collecting temperature data from each monitoring site, it may not be accurate.

blooming malus- tent caterpillar Plant pests have evolved with their plant hosts to synchronize their development with that of the host.  It is very important for immature stages of insects to hatch at the same time that young, soft foliage is available for them to feed on.  Imagine what would happen if the Eastern tent caterpillars hatched before the flowering crabapple leaves emerged?  They wouldn’t survive and so there would be no genes to pass on to the next generation.  Survival of the fittest, as Darwin would say.

IMG_3053_01

When the Hydrangea paniculata blossoms are turning from white to pink, larvacidal applications for peachtree borers and viburnum borers should be finishing up.

Over time, recorded temperature data for plants and plant pests have revealed that certain ornamental plants and insects pass through developmental stages at the same time. For example, when the Magnolia x soulangeana flowers are in the pink bud stage, the overwintering eggs of spruce spider mites are starting to hatch.  By knowing when the most vulnerable pest life stages are happening, we then have the opportunity to monitor them and apply management techniques at the most effective time.

These indicator plants are referred to as “plant phenology indicators”.  Some horticulturalists have found plant phenology indicators to be more accurate than GDD temperature models. There is a detailed list of common plant phenology indicators in OMAFRA publication 841, Guide to Nursery and Landscape Production & IPM (see Table 2–3, Common Phenology Plant Indicators for Ontario, on page 39).  They can also be found in the table below.

Updated 2007 Edition  Donald Orton, a retired nursery inspector and part-time insect and plant disease instructor from Wheaton, IL is the author of the book: Coincide: The Orton System of Pest and Disease Management.  Orton’s book is THE reference for ornamental plant pest phenology models and the main source of information for the models we use in Ontario.

IMG_3093_01

Cedar-apple rust (Gymnosporangium juniperi-virginiana) on crabapple leaves, late summer (J. Llewellyn)

So are there phenology models for plant diseases?  Yes and no.  Although plant diseases rely on temperature, they also rely on humidity and leaf wetness periods.  So for instance, it was plenty warm enough in May, 2015 for the Gymnosporangium rusts diseases (e.g. cedar-apple rust, hawthorn rust) to sporulate, but it was really dry.  Remember, it didn’t rain for nearly 3 weeks in May?  That meant that overwintering galls on the Juniper hosts couldn’t sporulate until late May or even early June, until the rains came.  By this time, that new soft first flush of foliage was hardening off and had developed a protective waxy cuticle to prevent a lot of those spores from infecting leaf tissue.  There wasn’t a lot of Gymnosporangium rust in the landscape, not compared to the last several years. The trees I saw the summer stage of rust on were mainly those rosaceous plants in low-lying areas or crowded, shaded landscapes or those with overhead irrigation….where we would expect to find increased humidity and leaf wetness periods.

Plant development (heat accumulation) is affected by the plant’s proximity to large bodies of water, major changes in elevation (e.g. low lying areas) and in exposed versus protect sites (e.g. exposure to wind, sun).  Of course plants growing in different hardiness zones and regions will differ in their development as well. In the spring and fall, there can be significant differences in heat units and therefore, plant development can vary quite a bit between these types of sites.  Where plant health monitoring will be carried out in many locations (as in the case of landscape maintenance), reference plant phenology indicators at each location.

IMG_2261_01 JenAndDave_08WhitePineWEevilDCheung

Where at least some of your monitoring activities take place in a defined area, it’s a really good idea to plant a Phenology Garden and fall is a great time of year to do it.  Even a shrub phenology garden is a great source of phenology information.

TABLE 2–3. Common Phenology Plant Indicators for Ontario

Acer platanoides Norway maple
Acer rubrum red maple
Acer saccharinum silver maple
Acer saccharum sugar maple
Aesculus hippocastanum horsechestnut
Aesculus parviflora bottlebrush buckeye
Amelanchier laevis serviceberry, shadberry
Catalpa speciosa northern catalpa
Cercis canadensis redbud
Cirsium arvense Canada thistle
Cornus alternifolia pagoda dogwood
Cornus mas cornelian cherry dogwood
Crataegus phaenopyrum Washington hawthorn
Daucus carota wild carrot (Queen Anne’s lace)
Forsythia sp. forsythia
Gleditsia triacanthos honeylocust
Hamamelis vernalis spring-blooming witchhazel
Hamamelis virginiana fall-blooming witchhazel
Hydrangea arborescens 
‘Grandiflora’ hills of snow hydrangea
Hydrangea paniculata 
‘Grandiflora’ panicle hydrangea
Kolkwitzia amabilis beautybush
Lonicera korolkowii 
‘Zabelii’ zabel honeysuckle
Lonicera tatarica tartarian honeysuckle
Magnolia x soulangeana saucer magnolia
Philadelphus mock orange
Pinus mugo mugo pine
Prunus x cistena purpleleaf sand cherry
Prunus serotina wild black cherry
Prunus triloba flowering almond
Ribes odoratum golden or flowering currant
Robinia pseudoacacia black locust
Salix caprea pussy willow
Sambucus canadensis American elder, elderberry
Solidago canadensis Canada goldenrod
Sorbus aucuparia European mountain ash
Spiraea nipponica 
‘Snowmound’ snowmound spiraea
Spiraea x vanhouttei bridal wreath spiraea
Syringa reticulata Japanese tree lilac
Syringa villosa late lilac
Syringa vulgaris common lilac
Ulmus pumila Siberian elm
Viburnum carlesii Koreanspice viburnum
Viburnum dentatum arrowwood viburnum
Viburnum lantana wayfaring tree viburnum
Viburnum opulus European cranberrybush viburnum
Weigela florida old-fashioned weigela
Yucca filamentosa Adam’s needle

The combined use of Growing Degree Day temperature data and Plant Phenology Indicators can give a clearer picture of the timing of pest emergence and other vulnerable life stages and results in greater success for management. To tailor your weekly IPM program, check out the Monitoring tables of timing and pest development stages for our ornamental trees and shrubs of OMAFRA’s publication 841, Guide to Nursery and Landscape Production & IPM (Tables 2–4 to 2–17, starting on page 41).

pub841-enCOVERcomp

Advertisements
This entry was posted in Arboriculture, IPM, landscape, Nursery Production and tagged , , , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s